Pro-Ject E1.2 Turntable Turntable Mats Please note that the RCA

Please note that the RCA sockets will need to be soldered to the arm wiring and the ground wire is normally connected via a circa 4mm female spade connector to the cutout out in the metal work (which already has bare metal on it)

2 x 19 mm mounting screws

-High torque AC motor and a platter made from phenolic resin which has the mass concentrated at the perimeter to provide stable speed stability and a punchy sound

and you’ll hear what happens when heavier gauge silver-plated conductors are fitted

Custom arm boards are available to special order at an additional cost

Pro-Ject E1.2 Turntable Turntable Mats Please note that the RCAThe E1. 2 is the entry level turntable from Pro Ject Audio, aimed at delivering a great sound experience on a limited budget, whilst also being hand made in Europe. The Plug & Play design is ready to be easily partnered with any MM phono stage (or amplifier with an inbuilt phono input). The E1. 2 features an updated platter design from that of the ABS polymer version of the original E1, this new 730g die cast aluminium main platter design creates an