Petroleum products. Corrosiveness to copper. Copper strip test Ingestion-build-143074 ISO 8504‑2 specifies abrasive blast-cleaning

ISO 8504‑2  specifies abrasive blast-cleaning methods for the preparation of steel surfaces before coating with paints and related products

These ultrasonic methods can be used to monitor dynamic changes in the size distribution

1 (Table 6

then you’d want to ensure that the copper products you produce conform to the specifications required by the industry

together with some choices

Petroleum products. Corrosiveness to copper. Copper strip test Ingestion-build-143074 ISO 8504‑2 specifies abrasive blast-cleaning1 Scope This International Standard specifies a method for the determination of the corrosiveness to copper of liquid petroleum products and certain solvents. Volatile products, having a maximum vapour pressure of 124 kPa at 37,8 C are included. Volatile products with a vapour pressure above 124 kPa at 37,8 C should be tested according to ISO 6251 (see caution below). Electrical insulating oils should be tested according to ISO 5662. CAUTION Some